RC Plugs allows you to remote-control all electronic outlets communicating on 433MHz and turns your smartphone or tablet into a universal remote control!
This system is COMPLETELY FREE and WITHOUT ANY ANNOYING ADS.
Note: By default, the app connects to a demo server so you can have a look at the system. However if you want to use it, you will have to install your own RC Plugs Server.
Visit https://rcplugs.info for detailed installation instructions.
Functions:
• Switch single outlets on/off. Up to 160 different outlets can be stored and controlled
• Control groups of outlets
• Add scripts that get executed on the server when groups get triggered (e.g. triggering music)
• Set repeating timers to switch outlets/groups automatically at a specific time and weekday
• Switching on geofences allows you to trigger specific groups e.g. let the lights go on when you come home and go out when you go leave
• The server provides a web-interface to control RC Plugs, update your system, do user management and take a look at logfiles from your browser. So you can access RC Plugs with your iOS devices too!
• RC Plugs can be configured for global access via internet (you'll need a dynamic DNS and port forwarding on your router)
• The app can scan its local (sub)network for available servers to automatically configure itself
Required hardware:
• A Raspberry Pi + SD-Card and power supply (about 50$)
• A 433MHz-Transmitter (about 3$)
• 443MHz electronic outlets with manual dipcode-switches (about 5$ each)
RC Plugs was originally developed as a bachelor thesis at the University of Ulm in Germany.
The according paper can be found here:
http://dbis.eprints.uni-ulm.de/985/1/BA_Moritz_Kraus_2013.pdf
If you have any problems, questions or improvement proposals, feel free to send me an email at moejetz@gmail.com!
I can help you with your problems and your feedback helps me improving RC Plugs continuously!
RC Plugs आपको 433MHz पर संचार करने वाले सभी इलेक्ट्रॉनिक आउटलेट को रिमोट-कंट्रोल करने की अनुमति देता है और आपके स्मार्टफोन या टैबलेट को यूनिवर्सल रिमोट कंट्रोल में बदल देता है!
यह प्रणाली COMPLETELY मुफ़्त और बिना किसी विज्ञापन के है।
नोट: डिफ़ॉल्ट रूप से, ऐप एक डेमो सर्वर से जुड़ता है ताकि आप सिस्टम पर एक नजर डाल सकें। हालाँकि यदि आप इसका उपयोग करना चाहते हैं, तो आपको अपना आरसी प्लग्स सर्वर स्थापित करना होगा।
विस्तृत इंस्टॉलेशन निर्देशों के लिए https://rcplugs.info पर जाएं।
कार्य:
• एकल आउटलेट को चालू / बंद करें। 160 तक विभिन्न दुकानों को संग्रहीत और नियंत्रित किया जा सकता है
• आउटलेट के नियंत्रण समूह
• स्क्रिप्ट जोड़ें जो सर्वर पर निष्पादित हो जाते हैं जब समूह ट्रिगर हो जाते हैं (उदाहरण के लिए ट्रिगर संगीत)
• एक विशिष्ट समय और कार्यदिवस पर आउटलेट / समूहों को स्वचालित रूप से स्विच करने के लिए दोहराए जाने वाले टाइमर सेट करें
• जियोफोन पर स्विच करने से आपको विशिष्ट समूहों को ट्रिगर करने की अनुमति मिलती है उदा। जब आप घर आते हैं तो रोशनी जाने दें और जब आप छुट्टी पर जाएं तो बाहर जाएं
• सर्वर RC प्लग्स को नियंत्रित करने, अपने सिस्टम को अपडेट करने, उपयोगकर्ता प्रबंधन करने और अपने ब्राउज़र से लॉगफ़ाइल्स को देखने के लिए एक वेब-इंटरफ़ेस प्रदान करता है। तो आप अपने iOS उपकरणों के साथ RC Plugs का उपयोग कर सकते हैं!
• RC प्लग इंटरनेट के माध्यम से वैश्विक पहुंच के लिए कॉन्फ़िगर किया जा सकता है (आपको अपने राउटर पर डायनेमिक DNS और पोर्ट अग्रेषण की आवश्यकता होगी)
• एप्लिकेशन अपने आप ही अपने आप को कॉन्फ़िगर करने के लिए उपलब्ध सर्वर के लिए अपने स्थानीय (उप) नेटवर्क को स्कैन कर सकता है
आवश्यक हार्डवेयर:
• एक रास्पबेरी पाई + एसडी-कार्ड और बिजली की आपूर्ति (लगभग 50 $)
• एक 433 मेगाहर्ट्ज-ट्रांसमीटर (लगभग 3 $)
• मैन्युअल डिपकोड-स्विच के साथ 443 मेगाहर्ट्ज इलेक्ट्रॉनिक आउटलेट (लगभग 5 $ प्रत्येक)
आरसी प्लग्स मूल रूप से जर्मनी में उल्म विश्वविद्यालय में एक स्नातक थीसिस के रूप में विकसित किया गया था।
अनुसार कागज यहाँ पाया जा सकता है:
http://dbis.eprints.uni-ulm.de/985/1/BA_Moritz_Kraus_2013.pdf
यदि आपके पास कोई समस्या, प्रश्न या सुधार प्रस्ताव हैं, तो बेझिझक मुझे moejetz@gmail.com पर ईमेल भेजें!
मैं आपकी समस्याओं में आपकी मदद कर सकता हूं और आपकी प्रतिक्रिया मुझे आरसी प्लग्स को लगातार बेहतर बनाने में मदद करती है!